Toyota Prius (2010)

Testing / Toyota Prius

Toyota Prius (2010)

Toyota Prius    

About the Test

The test was a two roll event. The planned difference between the rolls was the pitch of the vehicle; 5 degrees in Roll 1 and 10 degrees in Roll 2 and the position of the Hybrid III dummy. For Roll 1, the dummy was located “out of position;" leaning towards the passenger side approximately 45°. For Roll 2, the dummy was placed in the nominal seating position. Table 1 describes the impact conditions of each test.



Back to Top ↑ ← Back to Testing